Spare Parts for Trail and Adventure Motorcycles

In this category, you will find a selection of spare parts for Trail and Adventure motorcycles intended for servicing, repairing and setting up motorcycles designed for road riding, touring and riding on tracks.

At Non Stop Bikes, we supply genuine spare parts and compatible components from specialist brands. We select our products based on their quality, reliability, compatibility and availability, helping you keep your Trail motorcycle in safe and reliable working condition.

Spare parts and replacement components for Trail and Adventure motorcycles

Trail and Adventure motorcycles are used in a wide variety of conditions: urban commuting, road routes, long-distance touring and off-tarmac riding. This versatility exposes certain components to wear, dust, mud, water, vibration and temperature changes.

Carrying out the correct maintenance and replacing worn components helps preserve the motorcycle’s performance, reduce the risk of breakdowns and maintain reliable operation during your journeys.

Types of spare parts for Trail motorcycles

We stock service parts and spare parts for different motorcycle systems. Availability may vary depending on the make, model, year, engine capacity and version.

Filters and service parts

Filters and service consumables help keep the engine in good condition, particularly when the motorcycle is ridden in dusty or earthy environments.

In this section, you can find:

• Air filters.
• Oil filters.
• Fuel filters.
• Spark plugs.
• Gaskets and washers for drain plugs.
• Engine cover gaskets.
• Oil seals and O-rings.
• Model-specific service kits.

It is important to follow the intervals specified by the manufacturer and adapt the maintenance frequency to the motorcycle’s actual riding conditions.

Engine, intake and fuel system parts

The engine requires specific components to maintain the correct compression, lubrication, fuel supply and cooling. Depending on the motorcycle model, different repair or replacement parts may be available.

• Pistons, piston rings and gudgeon pins.
• Cylinder and cylinder head gaskets.
• Engine oil seals and bearings.
• Timing system components.
• Oil pumps and lubrication components.
• Injectors and fuel-injection components.
• Fuel pumps and filters.
• Inlet manifolds and intake hoses.
• Sensors related to engine operation.

Before ordering an engine component, it is particularly important to check the original part number and the exact motorcycle version.

Clutch and gearbox

The clutch and internal transmission are subject to wear, particularly during urban riding, heavily loaded journeys or off-tarmac use. A clutch that slips, drags or has an inconsistent feel may require inspection and replacement of some of its components.

Common spare parts include:

• Clutch plates.
• Separator plates.
• Clutch springs.
• Clutch baskets, hubs and pressure plates.
• Cables and actuation systems.
• Clutch master cylinder repair kits.
• Slave cylinders and hydraulic components.
• Transmission gaskets and oil seals.
• Gear levers and pedals.

Final drive kits, chains and sprockets

The final drive should be inspected regularly to check the tension, lubrication and wear of the chain and sprockets. Riding with a worn final drive can cause noise, snatching and irregular operation.

You can find spare parts such as:

• Drive chains.
• Front sprockets.
• Rear sprockets.
• Complete chain and sprocket kits.
• Connecting links.
• Chain sliders and guides.
• Chain rollers and tensioners.
• Genuine replacement guards.

For smooth and consistent operation, replacing the chain and both sprockets together is recommended when the complete set shows signs of wear.

Brake pads, discs and brake parts

The braking system is essential for safety. The weight of luggage, prolonged descents, road riding and the ingress of dust or mud can accelerate component wear.

Depending on the model, we stock:

• Front and rear brake pads.
• Brake discs.
• Brake pad pins and retaining clips.
• Brake lines.
• Brake master cylinders and callipers.
• Repair kits for master cylinders and callipers.
• Pistons, oil seals and gaskets.
• Brake pedals and levers.
• Brake-light sensors and switches.

If the lever or pedal feels spongy, the motorcycle loses braking performance, or vibrations and unusual noises appear, the complete system should be inspected before continuing to ride.

Fork and rear shock spare parts

The suspension on a Trail motorcycle directly affects stability, control and comfort. Riding with luggage or a passenger, or travelling off tarmac, can increase the demands placed on the fork and rear shock.

Suspension spare parts may include:

• Fork oil seals and dust seals.
• Internal bushes and guides.
• Fork springs.
• Rear shock springs.
• Repair and service kits.
• Linkage bearings and bushes.
• Spherical bearings and rear shock mounts.
• Adjustment components.

Spring rates and suspension settings should be adapted to the rider’s weight, luggage, passenger and intended use.

Bearings, wheels and axles

Wheel bearings and components must withstand water, dust, impacts and heavy loads. Play, unusual noises or uneven rotation may indicate that one of these parts requires servicing or replacement.

• Wheel bearings.
• Oil seals and spacers.
• Wheel axles.
• Spokes and nipples.
• Hubs and internal components.
• Valves and repair accessories.
• Steering head bearings.
• Swingarm and linkage bearings.

Cooling system

The cooling system must keep the engine within its normal operating temperature range, both on the road and during slow sections or off-tarmac riding.

Depending on the motorcycle, the following may be available:

• Radiators.
• Coolant hoses.
• Radiator caps.
• Thermostats and temperature switches.
• Water pumps and repair kits.
• Cooling fans.
• Temperature sensors.
• Cooling system gaskets and seals.

Coolant leaks, continuous fan operation or an abnormal increase in temperature should be investigated before the motorcycle is used again.

Electrical and electronic spare parts

Modern Trail motorcycles incorporate electrical and electronic systems for starting, battery charging, fuel injection, lighting and engine management.

Common electrical spare parts include:

• Batteries.
• Starter motors and starter relays.
• Stators and voltage regulators.
• Ignition coils.
• Sensors and switches.
• Fuses and relays.
• Switchgear and electrical controls.
• Replacement headlights, rear lights and indicators.
• Connectors and wiring components.

Before replacing an electrical component, the complete circuit should be checked, as a fault in the battery, a connection, fuse or wiring can produce symptoms similar to those of a defective component.

Controls, levers, pedals and frame parts

A fall or intensive use can damage external parts that directly affect control of the motorcycle.

• Brake and clutch levers.
• Gear and brake pedals.
• Grips and throttle tubes.
• Throttle and clutch cables.
• Footrests and brackets.
• Stand and mounting components.
• Genuine fasteners and brackets.
• Replacement plastics and covers.

Genuine and compatible spare parts

Genuine spare parts are components supplied or identified by the motorcycle manufacturer. They simplify selection through the original part number and retain the specifications intended for each model.

Compatible spare parts are manufactured by specialist brands as an alternative to the original component. Depending on the part, they may offer different materials, features, performance levels or prices.

The choice between a genuine and compatible part will depend on the type of repair, budget, availability and intended use. In both cases, it is essential to confirm that the part number is suitable for the motorcycle.

How to find the correct spare part for your Trail motorcycle

The same model may use different components depending on its year of manufacture, engine capacity, market or version. To avoid mistakes, you should check the following before placing an order:

• Motorcycle make.
• Full model name.
• Year of manufacture or registration.
• Engine capacity and type.
• Version or trim level.
• Original part number.
• Vehicle identification number when required.
• Measurements or photographs of the fitted component.

The year of registration does not always match the year of manufacture or the motorcycle’s technical version. The original part number or vehicle identification number may therefore be required to identify certain spare parts correctly.

When should you replace parts on a Trail motorcycle?

Replacement intervals depend on the manufacturer, mileage and riding conditions. A motorcycle used on tracks or exposed to dust, mud or water, or ridden with a passenger or luggage, may require more frequent inspections than a motorcycle used exclusively on the road.

Signs that may indicate wear or a fault include:

• Unusual noises or vibrations.
• Oil, fuel or coolant leaks.
• Difficulty starting.
• Loss of power or irregular operation.
• A clutch that slips or drags.
• Play in the wheels, steering or suspension.
• Inconsistent braking or reduced braking performance.
• Visible wear on the chain or sprockets.
• Leaks from the fork or rear shock.
• Fault warning lights on the instrument panel.

Trail motorcycle maintenance after riding on tracks

After an off-tarmac ride, the motorcycle should be cleaned and any components that may have accumulated dust, mud or dirt should be inspected.

• Inspect and clean the air filter.
• Check the chain tension and lubrication.
• Inspect the brake pads and discs.
• Check the wheels, spokes and tyre pressures.
• Check for possible engine and suspension leaks.
• Check the oil and coolant levels.
• Inspect hoses, cables and connections.
• Make sure there are no loose bolts or brackets.

Preventive maintenance helps identify minor issues before they develop into more serious breakdowns during a journey.

Safe installation of spare parts

Installation must be carried out according to the manufacturer’s instructions, using the correct tools and following the tightening torques and procedures specified in the workshop manual.

Work involving the brakes, steering, suspension, engine or electrical systems should be carried out by someone with the required knowledge. If you are unsure about installation or repair, you should contact a professional workshop.

Why buy Trail spare parts from Non Stop Bikes?

At Non Stop Bikes, we have experience with motorcycles and work with spare parts from specialist brands. We can help you identify the correct component before placing your order and check the available compatibility information.

Buying your Trail and Adventure motorcycle spare parts from Non Stop Bikes provides you with:

• Specialist advice.
• Genuine and compatible spare parts, subject to availability.
• Help checking part numbers and applications.
• Service, repair and replacement parts.
• Products from specialist brands.
• Delivery to Spain and other countries.
• Support from our motorcycle shop and workshop in Tona, Barcelona.

Buy spare parts for Trail and Adventure motorcycles

Browse our catalogue of spare parts for Trail and Adventure motorcycles and find components for servicing, repairing and setting up your motorcycle.

If you cannot find the part you need, contact Non Stop Bikes and tell us the make, model, year, engine capacity and part number. You can also send us a photograph or the vehicle identification number when required so that we can help you check compatibility and availability.