Rieju MR 300i Hard Enduro 2027 2T TFI
The Rieju MR 300i Hard Enduro 2027 is the most highly equipped and specialised version in the MR 300i range. It has been developed for extreme climbs, rocky sections and slow, technical terrain where manageable response, strong traction and additional motorcycle protection are required.
It is based on the 298 cc single-cylinder 2-stroke engine with TFI electronic fuel injection, but adds modifications specific to the Hard Enduro version. These include an inertia sleeve, a Hard water-pump cover with a higher-flow impeller, a dedicated spark plug and an exhaust developed to improve drive and traction at low revs.
Cooling is reinforced by a dedicated expansion tank and a twin electric fan module. It also features short gearing with an 11-tooth front sprocket, a red AXP chain guide, competition protection, repositioned footrests and front and rear pull straps to facilitate manoeuvres in extreme sections.
Key features
- 298 cc single-cylinder 2-stroke engine.
- TFI electronic fuel injection with two Bosch injectors.
- Three engine maps: Race, Forest and Wet.
- Specific Hard Enduro modifications.
- Inertia sleeve to improve response at low revs.
- Hard water-pump cover with a higher-flow impeller.
- Liquid cooling with twin electric fans.
- Hard Offroad-specific Rieju Power Racing by OXA exhaust.
- Short gearing with a Z11 front sprocket.
- Red AXP chain guide.
- Integrated electric start with dual starter buttons.
- 48 mm KYB fork with DLC treatment.
- Fully adjustable KYB rear shock.
- Black XTRIG triple clamps.
- EXCEL rims with machined black hubs.
- Michelin Enduro Medium tyres.
- Nissin brakes with Galfer discs.
- Specific protection fitted as standard.
- Dry weight of 103.5 kg.
Rieju MR 300i Hard Enduro 2027 engine
The Rieju MR 300i Hard Enduro 2027 uses a 298 cc 2-stroke engine with TFI electronic fuel injection. It employs two separate Bosch injectors designed to operate at high and low engine speeds.
- Type: single-cylinder 2-stroke.
- Engine capacity: 298 cc.
- Bore x stroke: 72 × 72.52 mm.
- Fuel system: TFI electronic fuel injection.
- Injectors: two separate Bosch injectors for high and low engine speeds.
- Intake: reed-valve intake with VForce 4 reed cage.
- Starting: integrated electric start with dual starter buttons.
- Cooling: liquid cooling with twin electric fans.
- Gearbox: 6-speed gearbox.
- Clutch: multi-disc wet clutch with diaphragm system.
- Exhaust: Hard Offroad-specific Rieju Power Racing by OXA exhaust.
Specific Rieju MR 300i Hard Enduro 2027 engine modifications
- Inertia sleeve.
- Hard water-pump cover.
- Higher-flow impeller.
- Dedicated spark plug.
- Dedicated Hard exhaust.
These modifications are designed to increase inertia, improve low-rev drive and make the engine easier to control through slow, technical sections.
TFI electronic fuel injection
The TFI, or Throttle-Body Fuel Injection, system electronically manages fuelling through two Bosch injectors. Each injector is configured to operate within a different part of the engine-speed range.
Three engine maps
- Race: configuration designed to provide a more direct response.
- Forest: map for typical Enduro riding.
- Wet: configuration for wet or low-grip surfaces.
Reinforced cooling
The Rieju MR 300i Hard Enduro 2027 features a dedicated cooling system designed to operate at low speeds, when less air flows through the radiators.
- Liquid cooling.
- Dedicated expansion tank.
- Radiator prepared for the Hard Enduro configuration.
- Twin electric fan module.
- Hard water-pump cover with a higher-flow impeller.
Shorter Rieju MR 300i Hard Enduro 2027 gearing
The transmission uses an 11-tooth front sprocket to provide shorter gearing. This configuration is designed to improve control and traction on climbs, extreme sections and technical obstacles tackled at low speed.
It also features a red AXP chain guide to keep the chain correctly aligned when riding over rough terrain.
Frame and chassis
- Frame: chrome-molybdenum steel central-backbone frame.
- Subframe: removable aluminium subframe.
- Swingarm: aluminium with a progressive linkage system.
- Triple clamps: black XTRIG.
- Handlebar: dual-diameter 28 mm Renthal Fatbar 802.
- Grips: Renthal.
- Seat: non-slip seat with lowered foam and additional grip strips.
Rieju MR 300i Hard Enduro 2027 suspension
Front fork
48 mm KYB inverted fork with a closed cartridge, AOS system and black anodised DLC anti-friction treatment.
- Brand: KYB.
- Diameter: 48 mm.
- System: AOS with closed cartridge.
- Treatment: anti-friction DLC.
- Adjustments: compression and rebound.
- Travel: 300 mm.
Rear shock
KYB rear shock connected to the swingarm’s progressive linkage system.
- Brand: KYB.
- Adjustments: preload, rebound and high- and low-speed compression.
- Travel: 310 mm.
- System: progressive linkage system.
Rieju MR 300i Hard Enduro 2027 brakes
It features Nissin master cylinders and callipers combined with Galfer discs. The rear disc uses a configuration developed specifically for Hard Enduro.
- Front brake: Nissin master cylinder and calliper with a 260 mm Galfer floating wave disc.
- Rear brake: Nissin master cylinder and calliper with a 220 mm, 5 mm-thick Galfer wave disc.
- Front protection: disc guard.
- Rear protection: machined aluminium guard.
The rear disc features dedicated geometry designed to help disperse mud and water.
Wheels and tyres
The Hard Enduro version uses aluminium EXCEL rims with machined black hubs and Michelin Enduro Medium tyres.
- Front rim: EXCEL spoked rim with machined hub, 1.60 × 21 inches.
- Front tyre: Michelin Enduro Medium 90/90-21.
- Rear rim: EXCEL spoked rim with machined hub, 2.15 × 18 inches.
- Rear tyre: Michelin Enduro Medium 140/80-18.
Rieju MR 300i Hard Enduro 2027 protection and equipment
- AXP Enduro sump guard.
- Swingarm protector.
- Front brake disc guard.
- Machined aluminium rear brake disc guard.
- Machined aluminium handguards.
- Red AXP chain guide.
- Repositioned stainless-steel footrests.
- Front pull strap.
- Rear pull strap.
- Simplified wiring system.
- Dual starter buttons.
- Red Hard seat with lowered foam.
- New 2027 Hard Enduro graphics.
- Rieju Connect available as an option.
Dimensions
- Length: 2,145 mm.
- Width: 810 mm.
- Height: 1,235 mm.
- Wheelbase: 1,475 mm.
- Seat height: 929 mm.
- Ground clearance: 320 mm.
Weight
Dry weight: 103.5 kg.
Fuel tank
Fuel-tank capacity: 9.8 litres.
Who is the Rieju MR 300i Hard Enduro 2027 designed for?
The Rieju MR 300i Hard Enduro 2027 is intended for experienced riders looking for a factory-prepared motorcycle for extreme routes, difficult climbs, technical uphill sections and terrain ridden at low speeds.
Its engine capacity, engine response and specialised configuration require the rider’s technical ability to be considered. The three engine maps allow the power delivery to be adjusted.
Recommended use
- Hard Enduro.
- Technical Enduro.
- Competition.
- Extreme sections and steep climbs.
- Rocky, muddy and root-covered terrain.
- Slow routes with limited natural cooling.
- Trails and areas authorised for Enduro riding.
Differences between the Rieju MR 300i Hard Enduro and Rieju MR 300i Pro 2027
Both versions share the 298 cc engine with TFI injection, three engine maps, KYB fork with DLC treatment, KYB rear shock, Renthal handlebar and EXCEL rims.
The MR 300i Hard Enduro 2027 adds specific modifications designed to improve its performance in extreme terrain:
- Inertia sleeve.
- Hard water-pump cover with a higher-flow impeller.
- Dedicated spark plug.
- Twin electric fans.
- Dedicated Hard exhaust.
- Short gearing with a Z11 front sprocket.
- AXP chain guide.
- 5 mm Hard Offroad rear disc.
- Specific protection fitted as standard.
- Repositioned stainless-steel footrests.
- Lowered seat with a height of 929 mm.
- Simplified wiring system with dual starter buttons.
Frequently asked questions about the Rieju MR 300i Hard Enduro 2027
How much horsepower does the Rieju MR 300i Hard Enduro 2027 produce?
The Rieju MR 300i Hard Enduro 2027 has a declared output of 20 hp.
What is the engine capacity of the Rieju MR 300i Hard Enduro 2027?
The engine capacity is 298 cc. It uses a 2-stroke engine with TFI electronic fuel injection.
What does TFI mean on the Rieju MR 300i?
TFI stands for Throttle-Body Fuel Injection. It is the engine’s electronic fuel-injection system and uses two separate Bosch injectors for operation at high and low engine speeds.
Does the Rieju MR 300i Hard Enduro have electric start?
Yes. It has electric start and a simplified wiring system with dual starter buttons.
Which engine maps does it have?
It has three selectable maps: Race, Forest and Wet. These allow the engine response to be adjusted according to the terrain, grip and riding style.
How much does the Rieju MR 300i Hard Enduro 2027 weigh?
It weighs 103.5 kg.
What is the seat height of the Rieju MR 300i Hard Enduro 2027?
The seat height is 929 mm. The Hard Enduro version uses a seat with lowered foam, positioning it 20 mm lower than the seat on the MR 300i Pro 2027.
Who manufactures the Rieju MR 300i Hard Enduro?
The motorcycle is manufactured by Rieju S.A. The manufacturer states that the 2-stroke engine with TFI injection was designed and manufactured in Spain.
What is the price of the Rieju MR 300i Hard Enduro 2027?
The recommended price published by Rieju is €11,199.
Buy your Rieju MR 300i Hard Enduro 2027 from Non Stop Bikes
Available from Non Stop Bikes. We offer finance, registration, home delivery and the option to part-exchange your used motorcycle.
If you have any questions about this model, contact us by WhatsApp or email. We can help you compare the Racing, Pro and Hard Enduro versions and determine which one best suits your experience and the terrain where you ride.
