Freewheel 30.6 18T

Description

Description - 30 hooking points and 6 pawls made of high-resistance treated steel - 3 groups of 2x5 hooks each, obtaining 30 hooking points per revolution. - Extraction using ISIS bottom bracket extractor key - Standard 1.37'' x 24T thread - Revised internal springs to increase the reliability and durability of the freewheel. - Lateral bearings on both sides - Compatible with 1/8” and 3/32” chains Material - Crown: machined Cr-Mo steel - Body: machined Cr-Mo steel Compatibility - Not compatible with BB30 cranks - Not compatible with cassette type cranks Size - 18 teeth - 6 pawls - 30 engagement points - Tooth width: 2.2mm - Total width: 17mm Weight - 190g Finish - Anodized red/black finish with laser engraved COMAS graphics. Additional information It is advisable to run-in the pinion beforehand to remove excess grease from the mechanism and ensure the correct seating of the triggers. This process can be speeded up by pouring a little oil into the groove between the center of the pinion and the teeth. If the sprocket is used for trials without first seating the triggers, it will not work properly and will cause it to jump, damaging the spline and trigger.